Phoenix Excavation Co. provides dirt work hauling and excavation services in Phoenix, Arizona. We handle site preparation grading, utility trenching, land clearing, concrete demolition removal, pool excavation and removal, and foundation excavation for building pads. Our crews also perform drainage grading, underground utility work, and hydro or vacuum excavation where the site calls for a less destructive digging method. Equipment is matched to the soil, material, access, and project scale.
Caliche-heavy soil across the Salt River Valley can turn routine digging and hauling into equipment-intensive work. We plan cubic yardage, compaction, drainage slope, and disposal before mobilizing to reduce surprises after excavation starts. Phoenix Excavation Co. is licensed through the Arizona Registrar of Contractors, bonded, and insured. Utility trenching begins with Arizona 811 Blue Stake requirements before a bucket enters the ground.
Phoenix spans 517.9 square miles, while the greater metro area has over 5.19 million residents, so lot access, soil conditions, and project scale vary widely from South Mountain to the Deer Valley corridor.
Phoenix Excavation Co. provides dirt work hauling across Phoenix and the greater Phoenix metro area, including Scottsdale, Tempe, Mesa, Chandler, and Glendale.
Dirt work hauling starts with measuring the material and matching truck capacity to the actual cubic yardage. Phoenix soils often combine decomposed granite with dense caliche, so the material must be evaluated before loading and disposal are planned.
Depending on the job, crews use excavators, skid steers, motor graders, compactors, box blades, dump trucks, or vacuum excavation trucks. The work can support grading, trenching, clearing, demolition, pool removal, foundation excavation, and drainage corrections.
Hauling also includes directing vegetation, rock, organic material, broken concrete, and excavated soil to the appropriate disposal or recycling destination. Planning that destination before work begins keeps the site clear for the next trade.
A coordinated plan connects excavation, hauling, grading, and disposal instead of treating them as separate jobs. That approach helps protect the property, control truck trips, and leave the site ready for construction or landscaping.
Phoenix Excavation Co. coordinates hauling with the excavation task that creates or uses the material. Services cover site preparation, grading, trenching, clearing, demolition, pool work, and the truck capacity needed to keep each site moving.
We measure the volume, plan the required loads, and haul decomposed granite, caliche-heavy soil, clean fill, sand, rock, gravel, or project debris as the job requires. Material source and disposal are coordinated with excavation and grading.
Request Estimate
Site preparation establishes the pad, finish grade, compaction, and drainage needed for garages, homes, retail pads, parking areas, and industrial sites. Unsuitable soil can be over-excavated and replaced with engineered fill before the next phase begins.
Request Estimate
Trenches are cut for water lines, sewer laterals, electrical conduit, and irrigation mainlines to the dimensions specified by the utility provider or civil plan. Hydro and vacuum excavation are available near known crossings or congested underground infrastructure.
Request Estimate
Land clearing removes brush, mesquite, creosote, root systems, rock, and construction debris before grading or foundation work. Cleared material is sorted and hauled away so the parcel is not left with debris or slash piles.
Request Estimate
Driveways, patios, slabs, and larger commercial concrete can be broken with equipment matched to slab thickness, loaded directly into trucks, and removed. Saw-cutting may be used on larger slabs to control the size of haulable sections.
Request Estimate
Crews excavate for new pools to the engineer's plan and perform partial or full removal of aging pools. Spoil, concrete shell material, and rock are hauled as work progresses, followed by backfill, compaction, and finish grading.
Request EstimateEach earthwork plan is built around the material being moved and what the finished site must support. These service options combine equipment, hauling, compaction, utility safety, and disposal details for common Phoenix projects.
Haul plans are based on measured volume, material condition, truck capacity, and the distance to a source or disposal facility. Phoenix Excavation Co. can source and deliver fill dirt, sand, rock, and gravel as part of a grading job.
Grading creates the bearing surface and water-management profile for a building pad, yard, parking lot, or commercial site. Work is coordinated with grading plans, soils information, and the next construction phase.
Traditional trenching moves material efficiently in open ground, while hydro excavation uses pressurized water and a vacuum truck to expose utilities with less risk from bucket teeth. The method is selected after utility locations and site congestion are reviewed.
Clearing and demolition remove vegetation, roots, abandoned debris, driveways, patios, and slabs before new site work. Materials are separated so vegetation, rock, organic debris, and broken concrete go to the appropriate destination.
Pool work may involve excavating a new shape from an engineer's plan or removing an existing shell under the applicable permit. The removal choice affects how much concrete is broken, hauled, and replaced with compacted fill.
The right approach depends on material density, access, utility proximity, lot size, the civil or engineering plan, and the condition the next trade needs. A residential drainage correction in Ahwatukee or Arcadia calls for a different equipment mix than a commercial pad in the Sun Corridor, while work near known utilities may shift from a standard excavator to hydro or vacuum excavation.
Phoenix Excavation Co. is licensed through the Arizona Registrar of Contractors, bonded through the state of Arizona, and insured. That coverage matters when heavy equipment, easements, buried utilities, and neighboring property are involved.
Excavators, skid steers, motor graders, compactors, box blades, hydraulic hammers, dump trucks, and vacuum trucks each solve a different site problem. The equipment plan is based on soil density, slab thickness, access, utility congestion, lot size, and haul volume.
Plans account for caliche, decomposed granite, expansive soil, monsoon drainage, and the grading requirements that shape work in Phoenix and Maricopa County. Compaction, slope, utility locations, and disposal are considered before equipment arrives.
We walk the site, explain what the work actually needs, and build the quote around measured volume, equipment, material, compaction, drainage, and disposal. That gives property owners a coordinated plan for the excavation itself and for everything that must leave or return to the site.
Request Site AssessmentCaliche is a dense, cemented layer of calcium carbonate found across the Salt River Valley. It can stop hand digging, slow standard excavation, and change the equipment time needed for grading, trenching, or pool work.
A short monsoon storm can drop more rain in thirty minutes than the ground has seen in weeks. Flat yards or grades sloping toward a structure can send water into garages, against foundations, or around retaining walls, so corrections may use slope, compacted swales, or French drains.
Water, gas, sewer, electrical, irrigation, and fiber lines can cross the planned excavation path. A locate request and careful exposure method reduce the risk of a bucket strike that could cause a repair and interrupt service beyond the job site.
Expansive soil, unsuitable material, and uneven compaction can contribute to slab cracking and foundation settlement. Over-excavating weak material and compacting engineered fill one lift at a time creates more uniform bearing capacity.
Guessing at dirt volume can double the expected truck count and trigger change orders after hauling begins. Measuring the excavation and considering how caliche-heavy material loads in a truck produces a more dependable haul plan.
Free or unverified fill may contain construction debris, large caliche chunks, or organic material that is unsuitable beneath a structural pad. Fill should be selected for its intended use, then placed and compacted appropriately rather than accepted only because it is available.
The process connects site review, utility safety, equipment planning, excavation, hauling, and finish work. Each step is based on the site's material, access, plans, drainage, and intended next use.
We review access, soil, existing grade, drainage, structures, and the area to be excavated or cleared. Measurements establish the expected material volume and give the quote a practical starting point.
Utility locations are addressed before digging, and available civil, engineering, grading, drainage, or soils information is reviewed. Permit-office or engineer coordination is included where the project requires it.
The crew selects excavation, grading, compaction, demolition, or vacuum equipment for the site conditions. Truck loads, material sources, and disposal or recycling destinations are planned before mobilization.
Crews cut, fill, trench, clear, break concrete, or excavate the pool or building pad according to the job plan. Soil, vegetation, debris, concrete, and rock are separated as work advances.
Excavated material and debris are loaded for the appropriate disposal or recycling facility. When the project needs fill, sand, rock, or gravel, material is sourced, delivered, and placed in coordination with the grading work.
Fill is compacted as specified, and the finished surface is graded for the intended drainage pattern. The site is cleared of slash piles and haul debris so it is ready for landscaping, inspection, or the next construction trade.
Tell Phoenix Excavation Co. what needs to be removed, delivered, graded, trenched, cleared, or excavated. We can walk the property, evaluate access and material, and prepare an estimate around the actual work.
These answers cover dirt hauling, fill delivery, grading, utility trenching, demolition, pool removal, and service coverage in the Phoenix area.
Call Our Excavation TeamFree dirt sometimes appears on local classifieds and community groups when homeowners or contractors want excess fill removed. You generally need your own truck or trailer and loading equipment, and the material may contain debris, caliche chunks, or organic matter that makes it unsuitable for structural fill.
Fill dirt typically runs $12 to $30 per cubic yard, while screened topsoil typically runs $25 to $45 per cubic yard. Cleanliness, screening, and delivery distance affect the price, so a project quote can combine material, delivery, and compaction.
The trucks described for this service are rated to carry 10 to 14 cubic yards per load. The actual haul plan also considers material type because caliche-heavy soil and decomposed granite do not load like loose topsoil.
Equipment may include excavators, skid steers, motor graders, compactors, box blades, dump trucks, hydraulic hammers, and vacuum excavation trucks. The machine mix depends on soil density, access, lot size, material volume, slab thickness, and nearby utilities.
An Arizona 811 Blue Stake locate request is filed at least two full working days before digging, as required by Arizona Revised Statutes Title 40. The locate is addressed before excavation so buried water, gas, sewer, electrical, or communications lines can be considered.
Traditional trenching moves more dirt per hour, but hydro excavation uses pressurized water and a vacuum truck to expose lines without a bucket tooth striking them. It is used near known utility crossings or where underground infrastructure is congested.
The source calls for a 2% minimum slope away from structures to support positive drainage under Maricopa County building standards. The finished plan may also use swales, French drains, or existing city storm systems where required by code.
Compaction testing typically targets 90-95% of maximum dry density, depending on what will be built on top. Unsuitable material can be over-excavated, then engineered fill is placed and compacted in lifts to create more uniform bearing capacity.
Residential grading often focuses on yard leveling and drainage away from a house, while commercial work may involve engineered fill, compaction reports, and civil-engineer coordination. A quarter-acre residential lot also calls for different equipment than a five-acre commercial pad.
Maricopa County requires either a partial or full removal permit before pool demolition begins. Partial removal breaks the shell bottom for drainage and backfills in place, while full removal excavates and hauls away the entire structure.
Broken concrete is loaded into haul trucks and taken to Valley recycling facilities, where it can be crushed into aggregate base material instead of landfilled. The job plan accounts for disposal fees and manifests so the property owner does not need a separate dump run.
Saguaro, ironwood, and other protected species are identified before clearing. When removal is required, the Arizona Native Plant Law may require a permit from the Arizona Department of Agriculture before work proceeds.
Phoenix Excavation Co. serves Phoenix, Scottsdale, Tempe, Mesa, Chandler, Glendale, and the greater Phoenix metro area. Phoenix neighborhoods named in the service source include Laveen, Ahwatukee, and Arcadia.